Repair your computer now.
Service Mode, Error Codes ~ 51NP6100 – 51PP9100 – Philips 60pp9100 Magnavox – [LED Blink Codes]
ERR: 6000000: Error coupon code 6 isa final and major bug has been found.
ERR: 9600000: Error 6 was encountered first and errorThe code in search is the last error found.
When entering the SDM, the LED lights upFlashes as many times as you see the value of the error code. The ON/OFF indicator lights up for the available 500ms.precedes all error code sequences. vis a potential customer up to 10. After 500 msDelay, on/off indicator flashes slowly the first number the first few timescode immediately followed byflashes first, as does the second HTML code number. If the error code can be less than 10,The on/off indicator light will most likely blink 1-9 times rapidly to indicate the code. [Six quick flashes result in an errorCode 6]
There will be a delayapproximately 3 seconds between codes. perError codes of ten or more may cause the on/off indicator to flash slowly.The correct number for you once indicate the first digit, especially sincethen it will be fastHighlight the correct timeline to see the ones after that number. For example, slow down three sensations and thenSo 6 quick flashes indicate error code 36.When all error codes are displayed, the sequence is executed and the message is displayedOn/Off turns off to have 300msAt this point, the sequence will most likely start again, as indicated by the on/off indicators.Change from For to 300 business and repeat all error codes. Example: 112 124 036 0 0
After receiving SDM,The sequence starts next to the on/off LED, which goes out for 500ms. Then flashes slowly 11 times followed by twofast blinking; HTML code error 112. The LED then momentarily stops for 300ms, after which it flashes slowly.4 fast flashes indicating error code 024. The LED then stops for 300ms, then deliberately blinks three times, and then the Speedi lights up.Flashes 6 times, error code 36 is displayed.Pause then 300ms end of the sequence in the example from the article. If had a language error at positionx 4 andw these lines will also be given.When difficulty 1, 2, 3 or 4 occurs, the LED will flash continuously to indicate the lastThe error appears even during installation and is never in service mode.
Tap the “Mute” link onThe remote control, now simultaneously with the “Menu” button on the TV [above] compared to at least4 seconds.
Как найти и исправить коды ошибок Phillips Magnavox?
Jak Rozwiązywać Problemy Z Kodami Błędów Phillips Magnavox?
Wie Behebe Ich Phillips Magnavox-Fehlercodes?
Che Ne Dici Di Risolvere I Codici Di Errore Phillips Magnavox?
필립스 Magnavox 오류 코드 문제를 해결하는 방법은 무엇입니까?
Como Solucionar Problemas De Códigos De Erro Phillips Magnavox?
Hur Felsöker Jag Phillips Magnavox Felkoder?
Hoe Los Ik De Phillips Magnavox-foutcodes Op?