Last week, some readers came across an error message with asc 0x80. This issue can occur due to several factors. We will review them below.
Repair your computer now.
Solution1001873.1: ASun T3 StorEdge[TM] Array: understanding Sense Key errors (disk errors); Erase disk errors with Vol Verify; Performing a read operation from a single driveA
Sun Storage T3
This field contains the following information about the StorEdge[TM] Solar Kit:
Detect key errors (disk errors)
Fixing hard drive kickback with Vol Verity
Performing a single drive scan
The StorEdge[TM] sun T3 firmware logs various types of CD-ROM hard drive errors.to the file syslog depending on the valueIt receives data from a specific disk. Not required for all expensesImmediate action. This describes the document meaning factors thattogether and the necessary action plan to followError messages are observed in the Sun StorEdge T3.syslog file
A. Discovery key = 0x1
The key sense corresponds to 0x1 of this messageIndicates that statements completed successfully with someThe recovery action that the disk receives. ⠀ If more than onebugs fixed, the last bug that occurred is also marked withrequired bytes. Generally, all discovery keys 0x1 are clearly bugs. Proactive sharing is not required. The followinga list of the most common errors seen in T3 syslogs. Note: Under certain mode settings, the last command can be completedbefore graduation.
Semantic Key=0x1, Asc is impliedSets 0x3, Ascq=0x0
Sense Data Description = Device Error writing device
Error 0x1/0x3 – soft recoveryAn error that can usually occur during Oprah Winfrey Vegan Challenge transient conditions,such as vibration or shock.
The disc is recorded under such conditionsa bit off track. The trip mayRestore the data to fit the head positively or negativelyCenter position behind the track (but inside the protective tape). This condition disappears when another write occurs to the same sector.performed (again assuming there is no vibration alsoeffect).
Semantic key=0x1, matches asc 0x9, Ascq=0x0
Discovery data description = Tracking failure
The data tracks on the disc layout are elliptical,I would say the result of the imperfect circular rotation of new media. vThe drive compensates for this condition by implementing a repeatable Out-Run (or RRO) logic. Part of RPOthis is a special servo code that allows the read/write headfollow the elliptical sorting of each track. · It is possibleO(due to mechanical action/vibration) through which the head can beCertainly not in the center. The reader recognizes it by the conditionMove the head impression (+ or – off center) straight ahead to readData. If the servo noise estimate makes such a setting, i.e.a few important ones along the way, and it reports the idea’s status as non-repeatable exhaustion (NRRO) and returns that0x1/0x9 Locates the key element. ⠀ This conditionusually restored on the next writefollow.
Semantic Key=0x1, Asc is 0x9, Ascq=0x1
Capture Data Description = Write Failed - Capture read error status
This error message indicates a disc servo failure.Map the disk head to the processed data track before writingOperation. Disc servo eliminates this knockrepartition the drive to ensure an accurate data track.
Sense Key = Asc 0x1, = 0xc, Ascq is 0x1
Discovery Data Description = Write Failed - Restored with automatic remapping
This error message is good newsb. Who reports the lessonThe drive had an error creating items, but it was recovered so the data was therereassigned. When signal insight fromThe write head is not durable at all, the drive assigns important information for replacementSector.
Sense key means 0x1, Asc=0x15, Ascq means 0x1
Detection data description = Mechanical position error
This error message indicates a temporary condition. vthe reader admits that the exact head is not where it should probably be,makes the correct settings and simultaneously reads or writes reportsnext round. Drive has continuous logicre-sync with itself.
Sense key = Asc 0x1, implies 0x17, Ascq = 0x1
Sense Data Description = Data retrieved with repetitions
This error occurs due to a read exception error. vThe error message indicates that data collection failed to retrieve some data.with the usual number of repetitions.
Sense Key=0x1, Asc means 0x17, Ascq=0x2
Sense Data Description = Data retrieved with positive head offset
This error occurs because of an exception to this read condition. vError message indicates which drive can usually recover datausing the usual number of repetitions.
Discovery Key=0x1, Asc=0x17, Ascq=0x3
Sense Data Description = Data received with negative header offset
All detection points 0x1/0x17 are exception resultsreading conditions. When there are too many people on the hard drivethese failures in a precious short period of time, it achieves failure predictionThreshold also returns 0x1/0x5dkey.
Sense key=0x1, asc=0x17, Ascq=0x8
The description of the discovery data indicates data that has been restored without overwriting as recommended by ECC.Fix your slow PC now with this free download.